Fast mounting sticky pads for signs

The perfect solution for fast fitting signage to walls without any fixtures of fittings required.

Fitting: *no drilling required. These fit onto the back of your sign board. Simply stick on, remove tape and secure.

• indoor + outdoor use
• White finish
• 30 mm x 50 mm x 3mm thick
• 3M technology

Fitting note:

• 10 per pack (white)
• *Do not hang heavy signs with these
• Ensure the both surfaces are smooth, clean and dry for best application.
• Peel off 1 side and stick on to the back of the sign first.
• Then peel off the second side and stick in place level/ where you want the sign to go
• *do not re use- once used. Dispose of and use a fresh label.
• Press onto the sign for 2 minutes with a little force to hold in place before letting go
• We advise to secure the electric wire/ cable in place so that if the suction did suddenly fail. The wire will hold the sign in place until you re attach.

Fitting note: we take no responsibility for the in correct fitting of any product. Please get in touch if you would like any install tips or advice.